Download Dev21 Untuk Ps2 To Usb

Pilih dev21.ELF lalu tekan o jika ada tulisan. Dev21 elf ps2 download. Free download boot.Elf hdloader untuk ps2 Banyak cara untuk menginstal File BOOT. Tancapkan flash disk di port Usb Playstation 2, (DEV21.ELF):t. Cara yg kedua jika file BOOT.ELF nya hilang HARUS di lakukan install ulang BOOT.ELF, Untuk persiapan download BOOT.ELF ps2.

Quote ======================================================================== Updated 21 Nov 2017: Zyxel NAS326 HDD booting issue Note: you don't have to worry about this issue if you are booting with USB rootfs. Here is what I found from reading the GPL source to trouble shoot the issue of booting the NAS326 with 2 HDDs, with the rootfs is on one HDD. Free download nada dering blackberry full. NAS326 stock u-boot uses an old AHCI driver. This old version set the link detection timeou to a very small value of 4 ms. This interval is apparently too small. In the latest version of this AHCI driver, it is set to 200 ms.

Since I have not started building new u-boot (because of UART booting issue with this box), we cannot update this u-boot, or replace it with a better one. So at the moment, we can only work around it. I will do some testing to see if we can pick a good work around to enable the SATA link up before we try to initialize the SATA port for booting the kernel on HDD. -bodhi =========================== Edited 1 time(s). Last edit at 05:23PM by bodhi. Quote Updated 21 Nov 2017: Zyxel NAS326 HDD booting issue Note: you don't have to worry about this issue if you are booting with USB rootfs. Here is what I found from reading the GPL source to trouble shoot the issue of booting the NAS326 with 2 HDDs, with the rootfs is on one HDD.

NAS326 stock u-boot uses an old AHCI driver. This old version set the link detection timeou to a very small value of 4 ms. This interval is apparently too small.

In the latest version of this AHCI driver, it is set to 200 ms. Since I have not started building new u-boot (because of UART booting issue with this box), we cannot update this u-boot, or replace it with a better one. So at the moment, we can only work around it. I will do some testing to see if we can pick a good work around to enable the SATA link up before we try to initialize the SATA port for booting the kernel on HDD. Update: - Here is a work around that seems to do the trick consistently for me and heiko: Whenever the box needs to be rebooted, just shutdown and power up again.

Then both HDDs will be initialized OK. -bodhi ===========================. The mentioned patch for 'mvneta' seems to be in mainline now: commit a59e386c4f4fce346161c0a62a5e1fbc1f435d6f Author: Simon Guinot Date: Mon Nov 13 16: +0100 net: mvneta: fix handling of the Tx descriptor counter commit 0d63785c6b94b5d2f05f90eea791f5 upstream. The mvneta controller provides a 8-bit register to update the pending Tx descriptor counter. Then, a maximum of 255 Tx descriptors can be added at once.

In the current code the mvneta_txq_pend_desc_add function assumes the caller takes care of this limit. But it is not the case. In some situations (xmit_more flag), more than 255 descriptors are added. When this happens, the Tx descriptor counter register is updated with a wrong value, which breaks the whole Tx queue management. This patch fixes the issue by allowing the mvneta_txq_pend_desc_add function to process more than 255 Tx descriptors.

Fixes: 2a90f7e1d5d0 ('net: mvneta: add xmit_more support') Signed-off-by: Simon Guinot Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman. [Mo Dez 4 08:] Linux version 4.14.3 (root@WDebian) (gcc version 6.3.0 20170516 (Debian 6.3.0-18)) #1 SMP Sun Dec 3 22:56:15 CET 2017 [Mo Dez 4 08:] CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c5387d [Mo Dez 4 08:] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [Mo Dez 4 08:] OF: fdt: Machine model: WD My Cloud EX2100.